2021-2024 Bronco Performance Calibration
Ford Performance
SKU:
FPFP-M-9603-B23
Width:
4.00
(in)
Height:
1.00
(in)
Depth:
5.00
(in)
$825.00
(No reviews yet)
Write a Review
Ford Performance
2021-2024 Bronco Performance Calibration
Enhance the performance of the 2.3L or 2.7L EcoBoost engine in your 2021-2024 Bronco. The Ford Performance engineered and dyno tested calibration delivers the Ford Performance promise of increased power and performance without sacrificing reliability.
- Improved throttle response throughout RPM range
- Optimized shift schedule for automatic transmission equipped vehicles
- Down-shift rev matching for manual transmission equipped vehicles
- Peak power for 2.3L= 330 hp @ 5,500 rpm
- Peak torque for 2.3L = 385 lb.-ft. at 3,500 rpm
- Peak power for 2.7L = 355 hp @ 5,500 rpm
- Peak torque for 2.7L= 433 lb.-ft. @ 3,500 rpm
- Ability to change tire size up to BFG 37x12.5R17 KO2 size (579 revolutions per mile) [Additional modifications required]
- Ability to change axle/FDU ratio up to 5.38
- Enables upgrade of M190 to M210 front drive unit by reconfiguring DLCM module
- For U.S. and Canadian vehicles
- 3 year/36k mile warranty from new vehicle in-service when installed by a Ford dealer or ASE/Red Seal certified technician
- CARB E.O. #: D-431-4 for 2021-2023 models
- ***NOT available for 2024 California vehicles***
- M-12655-F ProCal 4 delivery tool included
- * Premium fuel required*
***Reverting to stock calibration with non-production tires/gears will result in error codes. Loss of functionality of critical systems may occur***
***Calibration and ProCal 4 tool are VIN locked. Please contact the Tech Line with additional questions***
***NOTE*** ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode".
***NOTE*** ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
