BroncBuster Basics Combo - BroncBushing + BusterBrace
The BroncBushing kit includes the bushing, o-ring, snap ring retainer, and boot clamp for the driver's side of the rack, along with an install tool. Our bushing is made out of an engineered plastic that is more wear-resistant than carbon steel! The BroncBushing kit doesn't involve any removal or replacement of any existing components. Instead, it will help support the rack in a way that doesn't allow the rack to separate from pinion gear.
Please note, there is only one bushing on the driver's side to support the rack to pinion, it does involve removing a small plastic ring. Our acetal plastic is more wear-resistant than steel and is meant for long-term use.
Our BroncBushing product will compensate for the geometry angle and pressure caused primarily by aftermarket lift kits combined with oversized tires. We have gone to great lengths to make sure that this can be done easily without complete removal and overhaul of the steering rack.
The BusterBrace
During our research and testing of the BroncBushing out on the trail, we determined another weak point of the Bronco steering is the tie rods themselves. In an effort to strengthen the tie rods and prevent them from failing on the trail, we developed the Tie Rod "BusterBrace" set. These braces act as a splint made out of T6061 aluminum. Designed to help strengthen the underwhelming tie rod at its weakest point, our BusterBrace is like a layer of insurance to protect you on the trail and prevent you from getting stranded. Sold as a pair for driver and passenger tie rods.